> For the complete documentation index, see [llms.txt](https://docs.ironblocks.com/platform/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.ironblocks.com/platform/threat-detection/my-detectors.md).

# My Detectors

My Detectors: display currently active sets. \
Threat Detection Default set is activated by default on each smart contract that you upload to the platform and can be edited).

<figure><img src="/files/ivUPToJIYtwoDSN9S2S2" alt=""><figcaption></figcaption></figure>

When editing the default detection set, a configuration window will open:

You will then see a set the parameters you can configure:&#x20;

1. Detector Set Type.
2. Balance Change.
3. Admin Addresses.
4. Allow to Reenter Addresses.

Complete the configuration and save the changes.

<figure><img src="/files/QBHhPFsNgMbRMgjJrkFf" alt=""><figcaption></figcaption></figure>

You can then see the added Threat Detection Set in the "My Detectors" tab:

<figure><img src="/files/zuwNLoml1cfqqIjdGABK" alt=""><figcaption></figcaption></figure>